Send Inquiry x
I can help you
Send
aluminum foil strip

Aluminum Plate

Marine aluminum plate

Source:Original Editing:frank Time:2017-05-22 14:04
Inquiry:
Marine aluminum plate

    aluminum plate products are largely used in the superstructures of marine and offshore engineering, such as ship body structures and bays. In addition, aluminum tubes with small diameter can be used as vessels, and larger tubes and rods can be masts and beam-columns etc. Sometimes, some profiles with small wall thickness are used in hull structures for the purpose of lightening as well.
The aluminum plate products from Signi aluminum possess high strength, good processability and corrosion resistance, and completely meet the requirements of marine applications. Via the cooperation with international and domestic experts, Signi aluminum masters the state-of-the-art production technologies of aluminum plate and profiles for marine, and is able to provide prospective supports for marine and offshore industries.

    Signi aluminum are capable of providing various aluminum alloy products for shipping and offshore engineering, which are mainly applied in LNG tank, ferry, yacht, patrol boat, the superstructure and lifting platform for other large vessels, and the drilling platform etc.

Classic alloy:  5052、5754、5154、5086、5083、5383, 6005A、6082.

Product character: Superior corrosion resistance, good weldability, high fatigue resistance.


Specifications
Alloys (AA) Temper Thickness range (mm) Length range (mm) Width range (mm)
5052、5754、5154、5086、5083、5383, 6005A、6082
 
F and O
H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plate)
6 —   300 1000 — 10000 500 — 2700
 
Stretched aluminum plate
Thickness limit 6 — 70 mm
Length limit 2000 — 10000 mm
 
Chemical composition
Alloy (%) 5052 5083 5086 5754 6005A 6082
Si 0.25 0.40 0.40 0.40 0.50— 0.9 0.7~1.3
Fe 0.40 0.40 0.50 0.40 0.35 0.50
Cu 0.10 0.10 0.10 0.10 0.30 0.10
Mn 0.10 0.40— 1.0 0.20— 0.7 0.50 0.50 0.40~1.0
Mg 2.2— 2.8 4.0— 4.9 3.5— 4.5 2.6— 3.6 0.40~0.7 0.6~1.2
Cr 0.15— 0.35 0.05— 0.25 0.05— 0.25 0.30 0.30 0.25
Ni
Zn 0.10 0.25 0.25 0.20 0.20 0.20
Ti 0.15 0.15 0.15 0.10 0.10
Each (Others) 0.05 0.05 0.05 0.05 0.05 0.05
Total (Others) 0.15 0.10 0.10 0.15 0.15 0.15
Al Remaining Remaining Remaining Remaining Remaining Remaining
Single number indicates maximum content.
 
Packing
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.(aluminum plate)

Previous :Automative aluminum plate

Next :None