Send Inquiry x
I can help you
Send
aluminum foil strip

Aluminum Plate

Railway aluminum plate

Source:Original Editing:frank Time:2017-05-22 14:05
Inquiry:
Railway aluminum plate

    aluminum alloys have been widely applied in light rail, metro and high-speed rail. The features of light weight, corrosion resistance and good performance can be obtained by largely using aluminum in railway transportations. aluminum plate are mainly used as outer body sheet, inner decorative sheet, roof and floor plank. Furthermore, some aluminum tubes with small size are used for ventilation and transmission devices within the trains as well.

    The aluminum plate manufactured by Signi aluminum possess various advantages, such as high strength, superior extrusion performance, good weldability and good corrosion resistance etc. These aluminum plate are especially suitable for body structure, solebar and frame.

    Signi aluminum are capable of providing various aluminum plate products for railway transportation, such as floor plank, solebar, side wall, cantrail, roof and bolster etc.
 
Classic alloy: 5052, 5754, 5083, 5A06
                     6101, 6005, 6005A, 6082, 6063,  6N01, 6061, 6106
                     7003, 7N01, 7005, 7020

Product characters: high strength, stress corrosion resistance and good weldability.


Specifications
Alloys (AA) Temper Thickness range (mm) Length range (mm) Width range (mm)
5052, 5754, 5083, 5A06
 6101, 6005, 6005A, 6082, 6063,  6N01, 6061, 6106
7003, 7N01, 7005, 7020
 
F and O
H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plate)
6 —   300 1000 — 10000 500 — 2700
 
Stretched aluminum plate
Thickness limit 6 — 70 mm
Length limit 2000 — 10000 mm
 
Chemical composition
Alloy (%) 5052 5083 6063 5754 6061 7020
Si 0.25 0.40 0.20~0.6 0.40 0.40— 0.80 0.35
Fe 0.40 0.40 0.35 0.40 0.70 0.40
Cu 0.10 0.10 0.10 0.10 0.15— 0.40 0.20
Mn 0.10 0.40— 1.0 0.10 0.50 0.15 0.05~0.50
Mg 2.2— 2.8 4.0— 4.9 0.45~0.9 2.6— 3.6 0.8— 1.2 1.0~1.4
Cr 0.15— 0.35 0.05— 0.25 0.10 0.30 0.04— 0.35 0.10~0.35
Zr 0.08~0.20
Zn 0.10 0.25 0.10 0.20 0.25 4.0~5.0
Ti 0.15 0.10 0.15 0.15 0.08~0.25
Each (Others) 0.05 0.05 0.05 0.05 0.05 0.05
Total (Others) 0.15 0.10 0.15 0.15 0.15 0.15
Al Remaining Remaining Remaining Remaining Remaining Remaining
Single number indicates maximum content.
 
Packing
Sheet : Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.(aluminum plate)

Previous :None

Next :Aerosapce aluminum plate